23 March 2021

A Digital Dilemma - TNCs But No Radios?

Sometimes stuff just happens. For a few weeks I have been lazily working on a post about the Kenwood TH-D72A, singing its praises and encouraging you to go get one of these classics before Kenwood pulls the plug. Looks like they were a step or two ahead of me, because I saw this posted to the Gigaparts site late yesterday:

Crap.

Some wags on Facebook chided me, telling me Kenwood announced the death of the D72 at the same time they announced the pending demise of their flagship TH-D74 DSTAR/APRS handheld. Honestly, I don't remember seeing anything about the demise of the D72. Maybe I was just focused on the announcement of the D74 and didn't pay attention. Or maybe it's because I'm getting old. Or both.

Anyway, this post will now take a turn to a topic I've been thinking about for a while - the death of the TNC-capable VHF radio, and what to do about it. 

Many say, "packet is dead, nobody needs TNCs anymore", and the manufacturers seem to be leading that chant. Kenwood is (was?) the last manufacturer to support general purpose TNC integration, either by building rigs with built-in full featured AX.25 TNCs, like the TH-D72a and the enormously popular (and still in production, I think) TM-D710a. Kenwood was also the last mainline manufacturer to make a mobile VHF radio with a data port that allows the user to hook up an external TNC. The TM-V71A is still listed as available on Kenwood's website, but is out of stock with all retailers. It too may just be waiting for the undertaker. 

Icom and Yaesu have not offered VHF mobile radios with built-in TNCs for a long while, but until fairly recently they each kept a few radios in their lineup with 6-pin DIN data connection ports for external TNC connections. I don't know when Yaesu last offered a VHF mobile rig with this capability, and Icom's last model, as far as I can tell, was the the ID-880H DSTAR rig that went out of production at least two years ago.

Yaesu has kinda' sorta' redeemed itself by keeping mobile and handheld rigs in its lineup that have built in 'KISS' (keep it simple stupid) TNCs. A KISS TNC offers a partial implementation of the full AX.25 packet protocol, leaving out things like digipeat, mailbox and flow control capability. This means a manufacturer can provide key TNC functionality with much lower hardware overhead. For APRS and Winlink use, it's a great compromise. However, Yaesu seems to have so tightly bound the KISS TNC functionality to APRS in their rigs that it's tough to get the radios to work with Winlink. In fact, I don't know that anyone's been able to do it.

Today if you want to get into packet APRS or Winlink your best bet may be to go buy an HF rig! Yup, both Icom and Yaesu still make all-mode multi-band (HF/VHF/UHF) 'shack-in-a-box' radios that have data ports on the back. The Icom IC-7100, the Yaesu FT-991A and the classic Yaesu FT-818 are still for sale, even during this time of 'the Covid'. The IC-7100 and the FT-991A will both give you up to 50 watts of output on VHF. The FT-818 will only provide a few watts, depending on your power source, but still, it's amazing what that little rig can do.

Rear panel of the Yaesu FT-991A. The data port is highlighted in red


Rear panel of the Icom IC-7100. The data port is highlighted in red


Rear panel of the Yaesu FT-818 QRP rig. The data port is highlighted in red

In fact, this is exactly how I do it. My Winlink 'station' is a Yaesu FT-991A. It handles both HF and VHF Winlink. For the VHF side I'm using a Coastal Chipworks TNC-X connected to the radio's data port. Works like a champ.


So maybe if you want to do VHF packet, Winlink or APRS you need to first go HF!

W8BYH out

5 comments:

  1. Just looked for Coastal Chipworks online. http://www.coastalchip.com/

    "Coastal ChipWorks, the manufacturer of TNC-X, TNC-Pi and many other great digital communications products has ceased operations. It has been a wonderful two decades of service and we want to express our gratitude to all of our customers.

    I am working on a mechanism by which TNC-Pi will continue to be available. A clone of the original TNC-X is currently available from MFJ Enterprises. I hope that the TNC-Pi will be available fairly early in the coming year."

    Not sure what year is the 'coming year'.

    ReplyDelete
    Replies
    1. Yoda, yeah, I'm surprised the Coastal Chip Works disappeared so fast. Like so many electronics designs, parts availability became the issue. I've got two of them, one with the digi board installed. Good design.

      Delete
  2. As always, a great post and spot on with the commentary. I had always wondered what the difference was between full AX.25 and KISS & now I know. The discontinuation of both the D72 and the D74 has me wondering about Kenwood's commitment to the amateur radio market. They were a no show at the online Hamcation, despite strong visibility by both Icom and Yaesu. Hmm...

    ReplyDelete
    Replies
    1. Joe, I've also been wondering about Kenwood's future in ham radio. While Yaesu and Icom have announced slow new product roll-outs due to COVID and parts problems, Kenwood is just slowly killing off their line with no announcements or hints about what might be coming.

      Delete
  3. Yaesu still provides a data port on the higher end VHF/UHF rigs (FTM-X00 series). The end user does need a mini-din10 to mini-din6 adapter (CT-164, IIRC). I have one in my FTM-400XDR.

    ReplyDelete